1. Home
  2. Login
  3. Checkout

BUDDYCLUB ENGINE

Page:  1  2   >   >>   View All (13)

BC-FAP-DC5-JAC / BUDDY CLUB HONDA DC5 IDLER PULLEY

BC-FAP-DC5-JAC / BUDDY CLUB HONDA DC5 IDLER PULLEY

MANUFACTURER : Buddy club

UNIT QUANTITY : 1

SPECIFICATION : IDLER PULLEY

MATERIAL : Aluminium

MODEL YEAR : Honda Dc5 (Air Con)

Buddy Club has just released their new P1 Racing Crank Pulley Kit for the Honda K-series engines. Honda K-series engines love to rev and you can free your engine to rev more quickly with the Buddy Club P1 Racing Pulley Kit. By reducing rotational mass and adjusting the pulley size ratio this kit offers improved acceleration quicker throttle response and has been shown to free up an additional 8 HP and 7 ft-lb of torque in some race applications. The P1 Racing kit includes a Crank Alternator and Power steering/Idler pulleys. Each kit is paired with a high quality 7-rib replacement belt.

 

Price: 239.00 (286.80 Including VAT at 20%)

BC-FCMM001-EVO / BUDDY CLUB CAMS EVO 4G63 ENGINE - END ON LINE CLEARANCE NO RETURN OR REFUND

BC-FCMM001-EVO / BUDDY CLUB CAMS EVO 4G63 ENGINE - END ON LINE CLEARANCE NO RETURN OR REFUND

MANUFACTURER : Buddy club

UNIT QUANTITY : 2

SPECIFICATION : 264 inlet 272 exhaust

MODEL YEAR : EVO 4G63 Engine

CLEARANCE PRICE-WHEN THEIR GONE THEIR GONE - NO RETUNS - END OF LINE

 

Price: 200.00 (240.00 Including VAT at 20%)

BC-RCSL4-440 / BUDDY CLUB K SERIES  440cc INJECTOR SET

BC-RCSL4-440 / BUDDY CLUB K SERIES 440cc INJECTOR SET

MANUFACTURER : Buddy club

UNIT QUANTITY : 4

SIZE : 440cc

SPECIFICATION : K SERIES INJECTOR SET

MODEL YEAR : K20

 

Price: 350.00 (420.00 Including VAT at 20%)

BC-RCSL4-550-K / BUDDY CLUB K SERIES  550cc INJECTOR SET

BC-RCSL4-550-K / BUDDY CLUB K SERIES 550cc INJECTOR SET

MANUFACTURER : Buddy club

UNIT QUANTITY : 4

SPECIFICATION : K SERIES INJECTOR SET

MODEL YEAR : K20

Price: 350.00 (420.00 Including VAT at 20%)

BC-RCSL4-550-S2 / BUDDYCLUB S2000 SERIES INJECTOR SET

BC-RCSL4-550-S2 / BUDDYCLUB S2000 SERIES INJECTOR SET

MANUFACTURER : Buddy club

UNIT QUANTITY : 4

SIZE : 550cc

SPECIFICATION : S2000 INJECTOR SET

MODEL YEAR : Honda S2000 AP1

Price: 350.00 (420.00 Including VAT at 20%)

BC-HD-HGEVO / BUDDY CLUB HONDATA INTAKE GASKET MITSUBISHI EVO 4G63 THERMAL HEATSHIELD GASKET

BC-HD-HGEVO / BUDDY CLUB HONDATA INTAKE GASKET MITSUBISHI EVO 4G63 THERMAL HEATSHIELD GASKET

MANUFACTURER : Buddy club

UNIT QUANTITY : 1

COLOUR : Blue

MATERIAL : Thermal Plastic

MODEL YEAR : For 4G63 Engine

Hondata Intake Gasket Mitsubishi Lancer Evo 4G63 Thermal Heatshield Hondata have developed a special high temperature insulating gasket which replaces the stock intake gasket. This and bypassing several heat sources significantly reduces the transfer of heat from the head to the intake and incoming air giving you up to 5% more power. Turbocharged cars often use an aluminum intercooler to cool the air compressed by the turbo. The intake manifold is also made of aluminum but because it is heated by the head from combustion and coolant works in reverse to an intercooler by heating the intake air by as much as 50 C. Fact: For every 3.3 C (5 F) rise in intake temperature air density drops 1%. The hotter the air the less fuel the computer injects to compensate for reduced oxygen. HondaLogger datalogging software has enabled us to measure intake air temperature under varied driving conditions. Around town testing has shown an average drop of around 10 degrees C which is good for around 3 percent power increase. Remember though that 3 percent power increase is difficult to feel. You'd feel a greater change in performance getting rid of that passenger. In certain conditions a 30 C drop has been measured. The Honda manifold is heated in up to 5 places. From the head the interior heating takeoff hose the cold idle valve the idle control valve and the throttle body heate

 

Price: 30.00 (36.00 Including VAT at 20%)

BC-HD-HGWRX / BUDDY CLUB HONDATA INTAKE GASKET IMPREZA  THERMAL HEATSHIELD GASKET

BC-HD-HGWRX / BUDDY CLUB HONDATA INTAKE GASKET IMPREZA THERMAL HEATSHIELD GASKET

MANUFACTURER : Buddy club

UNIT QUANTITY : 2

COLOUR : Blue

MATERIAL : Thermal Plastic

MODEL YEAR : WRX Sti

Hondata have developed a special high temperature insulating gasket which replaces the stock intake gasket. This and bypassing several heat sources significantly reduces the transfer of heat from the head to the intake and incoming air giving you up to 5% more power. Turbocharged cars often use an aluminum intercooler to cool the air compressed by the turbo. The intake manifold is also made of aluminum but because it is heated by the head from combustion and coolant works in reverse to an intercooler by heating the intake air by as much as 50 C. Fact: For every 3.3 C (5 F) rise in intake temperature air density drops 1%. The hotter the air the less fuel the computer injects to compensate for reduced oxygen. HondaLogger datalogging software has enabled us to measure intake air temperature under varied driving conditions. Around town testing has shown an average drop of around 10 degrees C which is good for around 3 percent power increase. Remember though that 3 percent power increase is difficult to feel. You'd feel a greater change in performance getting rid of that passenger. In certain conditions a 30 C drop has been measured. The Honda manifold is heated in up to 5 places. From the head the interior heating takeoff hose the cold idle valve the idle control valve and the throttle body heater. The Heatshield gasket kit contains an insulating gasket and installation in

 

Price: 30.00 (36.00 Including VAT at 20%)

BC-KHG-F20C / BUDDY CLUB HONDATA HEATSHIELD GASKET S2000 AP1

BC-KHG-F20C / BUDDY CLUB HONDATA HEATSHIELD GASKET S2000 AP1

MANUFACTURER : Buddy club

UNIT QUANTITY : 1

COLOUR : Blue

MATERIAL : Thermal Plastic

MODEL YEAR : Honda S2000 AP1

A special high temperature insulating gasket which replaces the stock intake gasket. This and bypassing several heat sources significantly reduces the transfer of heat from the head to the intake and incoming air giving you up to 5% more power. Turbocharged cars often use an aluminum intercooler to cool the air compressed by the turbo. The intake manifold is also made of aluminum but because it is heated by the head from combustion and coolant works in reverse to an intercooler by heating the intake air by as much as 50 C. Fact: For every 3.3 C (5 F) rise in intake temperature air density drops 1%. The hotter the air the less fuel the computer injects to compensate for reduced oxygen. Around town testing has shown an average drop of around 10 degrees C which is good for around 3 percent power increase. Remember though that 3 percent power increase is difficult to feel. You'd feel a greater change in performance getting rid of that passenger. In certain conditions a 30 C drop has been measured. The Honda manifold is heated in up to 5 places. From the head the interior heating takeoff hose the cold idle valve the idle control valve and the throttle body heater. The Heatshield gasket kit contains an insulating gasket and installation instructions. A race version only version with the thermostat bypass blocked is also available.

 

Price: 56.00 (67.20 Including VAT at 20%)

BC-RSVSC-K20 / BUDDY CLUB VALVE SPRING CHANGER K20

BC-RSVSC-K20 / BUDDY CLUB VALVE SPRING CHANGER K20

MANUFACTURER : Buddy club

UNIT QUANTITY : 1

SPECIFICATION : VALVE TOOL

MODEL YEAR : K20 HEAD

 

Price: 220.00 (264.00 Including VAT at 20%)

BC-FCK20-KRST / BUDDY CLUB K20 CAMS N+ SPEC DROP IN CAMS

BC-FCK20-KRST / BUDDY CLUB K20 CAMS N+ SPEC DROP IN CAMS

MANUFACTURER : Buddy club

UNIT QUANTITY : 2

SPECIFICATION : Inlet & Outlet Cams

MATERIAL : FORGED

MODEL YEAR : K20 Engine EP3 DC5

DEVELOPED IN CONJUNCTION WITH KUROKI RACING- N+ FAST ROAD SPEC CAMS -CAN BE DROPPED STRAIGHT INTO K20-K24

 

Price: 495.00 (594.00 Including VAT at 20%)

BC-FCK20-ST1 / BUDDY CLUB K20 RACE CAMS

BC-FCK20-ST1 / BUDDY CLUB K20 RACE CAMS

MANUFACTURER : Buddy club

UNIT QUANTITY : 2

SPECIFICATION : E/X 110-115 DEG.BTDC RACE

MODEL YEAR : K20 EP3 DC5

 

Price: 550.00 (660.00 Including VAT at 20%)

BC-FCMP-K20 / BUDDY CLUB EP3 DC5 CAM PULLEY

BC-FCMP-K20 / BUDDY CLUB EP3 DC5 CAM PULLEY

MANUFACTURER : Buddy club

UNIT QUANTITY : 2

SPECIFICATION : Adjustable Timing Pulley

MODEL YEAR : K20 EP3 & DC5 2001-2006

Buddy Club P-1 Racing Cam Gears allows precise tuning of camshaft timing which is an essential tool when using any aftermarket performance camshaft. P1 Racing cam gears are made from forged AL7075-T6 aircraft aluminum which are the strongest and lightest adjustable cam gears on the market today.

 

Price: 200.00 (240.00 Including VAT at 20%)

Page:  1  2   >   >>   View All (13)

Recently Viewed